LCD SCREEN
B-24
■ Selecting the “Eco Mode” or
“Shutoff Support Mode”
You can save the machine power by setting the eco
mode or the shutoff support mode.
If you leave the machine without using for a
specified period of time, the machine enters in one
of these modes.
“Eco Mode”;
Machine will enter a sleep mode. Touch the screen
or press the “Start/Stop” button to continue sewing.
“Shutoff Support Mode”;
Machine will enter lower power modes after set
period of time. Turn machine off and then back on
to restart sewing.
Press the “Start/Stop” button or touch the screen
display to recover from these modes.
a
Press .
→ The settings screen appears.
b
Display page 5 of the settings screen.
c
Use or to select the time until
entering the mode.
■ Changing the Pointer Shape When a
USB Mouse Is Used
In the settings screen, the shape can be selected for
the pointer that appears when a USB mouse is
connected.
a
Press .
→ The settings screen appears.
b
Display page 4 of the settings screen.
c
Use or to choose the pointer shape
from the three settings available ( ,
and ).
d
Press to return to the original screen.
Condition Eco Mode Shutoff Support
Mode
Available time OFF, 1 - 120 (minute) OFF, 1 - 12 (hour)
“Start/Stop” button Green flashing Green slow flashing
Suspended function Machine light,
Screen display
All functions
After recovering The machine starts
from the previous
operation.
You need to turn off
the machine.
• If you turn off the machine while the
machine is in the “Eco Mode” or the
“Shutoff Support Mode”, wait for about 5
seconds before turning on the machine
again.
To Next Page
Loading...
Need help?
General
