Baby Lock Aria BLAR User Manual

LOWER THREADING
Getting Ready
Basic operations B-37
B
1
f
Insert the tab in the lower-left corner of the
bobbin cover (1), and then lightly press
down on the right side to close the cover
(2).
g
Press to unlock all keys and
buttons.
Pulling Up the Bobbin Thread
There may be some sewing applications where
you want to pull up the bobbin thread; for
example, when making gathers, darts, or doing
free motion quilting.
a
Guide the bobbin thread through the
groove, following the arrow in the
illustration.
* Do not cut the thread with the cutter.
* Do not replace the bobbin cover.
b
While holding the upper thread, press the
“Needle Position” button to lower the
needle.
a “Needle Position” button
c
Press the “Needle Position” button to raise
the needle.
d
Press to lock all keys and buttons.
e
Gently pull the upper thread. A loop of the
bobbin thread will come out of the hole in
the needle plate.
f
Pull up the bobbin thread, pass it under the
presser foot and pull it about
100 mm (approx. 4 inches) toward the back
of the machine, making it even with the
upper thread.
a Upper thread
b Bobbin thread
g
Replace the bobbin cover.
h
Press to unlock all keys and
buttons.
Memo
• You can pull up the bobbin thread after
threading the upper thread (“UPPER
THREADING” on page B-38).

Baby Lock Aria BLAR Specifications

General

Brand	Baby Lock
Model	Aria BLAR
Category	Sewing Machine
Language	English