Stitch Setting Chart
B-44
Applications, stitch lengths and widths and whether the twin needle can be used are listed for utility stitches in the
following table.
*1
Patterns printed on the numeric keys on the machine can be selected directly. For details, refer to “Preset utility stitches” on
page B-50.
*2
For free motion quilting, use free motion open toe quilting foot “O” (sold separately with some models).
*3
When (Automatic reverse/reinforcement key) is activated, the stitch will begin with reinforcement stitch.
If (Reinforcement priority) on the settings screen is also set to “ON”, the machine will sew reinforcement stitches at the
end of stitching and then stop.
*4
For free motion quilting, use free motion quilting foot “C” (sold separately with some models) or free motion open toe quilting
foot “O” (sold separately with some models).
Stitch Setting Chart
To Next Page
Loading...
