Basic Stitching
S-6
Straight stitches are used for sewing plain seams.
• Using the table below, refer to “Using the utility
stitch tables in the “Sewing” section” in the “Basic
operations” section.
* Stitch patterns can be selected directly by pressing the
numeric keys on the machine during preset utility stitch
mode. Refer to “Basic operations” section.
Basting
Sew basting with a stitch length between 5 mm (3/16 inch)
and 30 mm (1-3/16 inches).
a
Attach zigzag foot “J”.
b
Select stitch
.
c
Start sewing.
Basic stitching
a
Baste or pin together the fabric pieces.
b
Attach zigzag foot “J”.
c
Select a stitch.
d
Lower the needle into the fabric at the beginning of the
stitching.
e
Lower the presser foot lever, and then start sewing.
f
When sewing is finished, cut the thread.
Chapter 2
UTILITY STITCHES
Basic Stitching
Stitch name Stitch
BLMAV
Presser foot
BLMSP/BLMLR
BL210A
Stitch number
Basting stitch 1-08 08 07
J
Straight stitch (Left)
1-01
01
* 01*
1-02
02
* 02*
Straight stitch (Middle) 1-03
03
* 03*
Straight stitch (Middle) 1-04
04* 04*
Triple stretch stitch 1-05
05
* 05*
J
To Next Page
Loading...
