BabySense PC01-CR - Fitting on babys clothing (over the diaper)

• Keep the monitor safely stored and away from children
when not in use.
• Contains small parts that could be dangerous to
children if taken apart.
• Discard parts of the packaging that may be hazardous
to children.
• Use the monitor only when baby is in moonless
locaon. Do not use in a moving car/stroller, etc.
• Pete Clip is a baby care aid, not a medical device. It is
not intended for the diagnosis, prevenon or
monitoring of a disease, injury or handicap.
• Pete Clip is designed for healthy infants only up to
one year of age, and is not to be used with high-risk
infants requiring constant medical supervision.
• Pete Clip does not replace responsible and proper
adult supervision of your baby. Check on your child at
regular intervals and ensure that the low baery
indicaon light (requiring immediate baery
replacement) is not blinking.
Fing on baby’s clothing (over the diaper):
Set the device to sensive mode as described in
"Sensive Mode" secon below.
Pete Clip Pete Clip can also be used clipped onto the
waistband of elascated pants and on a thin layer of
clothing separang the sensor from the skin, as long as
the movement sensor is snugly fied in the baby's
tummy area. Do not use too much or thick clothing as
this may reduce the sensivity of the monitor and
may muffle the alarm sound. Ensure the alarm can be
heard if baby is covered in clothing and/or blankets and
in all locaons throughout the place of care.
Fig E
Fig F
8