Operation ECA 450
18 Instruction 0024-9400
4. Press ENTER key to display the contents of chosen memory location.
Observe that “MEM:nnnn ” (where nnnn denotes the memory location
number) appears in the top line, signifying that the data being displayed
was recalled from memory. Also note that if any Test ID information was
associated with the test data, this information is displayed at the bottom
of the screen. Refer to Section 2.17.8 for additional information on Test ID.
«MEM:nnnn««««««NGAS«
O2 4.5 %
CO 12 ppm
EFF 82.2 %
CO2 9.9 %
T-STACK 374 °F
T-AIR 68 °F
.
.
.
SO2( 3) 1 ppm
xxxx
«MEM:nnnn«««««««««««
PRESS -0.25 inwc
xxxx
Where: nnnn = memory location number
xxxx = test ID information
Tip: Use < > keys to quickly advance to the top and bottom of screen.
5. Press ESC to return to Memory Directory screen where another memory
location can be viewed. Or press ESC twice to return to Memory menu
screen.
To Next Page
Loading...
