ECA 450 Operation
Instruction 0024-9400
2.9 Recalling Test Data Stored in Memory
To recall the contents of a particular memory location containing either
combustion test data or a pressure measurement, do the following:
1. Press MEMORY key to display the Memory menu screen.
2. Use ∧∨ keys to place cursor next to “Memory Directory”; then press
ENTER to show the directory of all stored test data.
«««««««MEMORY«««««««
ª Memory Directory
Transmit Memory
Clear Memory
3. Use ∧∨ keys to place cursor next to memory location that contains data to
be recalled. Note that memory locations are identified by the date and
time the data was stored. Also note that memory locations that do not
contain data are identified as “Memory Empty.”
Memory Directory
ªnnnn mm/dd/yy hh:mm
nnnn Memory Empty
Where: nnnn = memory location number
mm/dd/yy = month/day/year
hh:mm = hour:minute
To Next Page
Loading...
