Need help?Do you have a question about the Bachmann Dynamis Ultima and is the answer not in the manual?
General| Frequency | 2.4 GHz |
|---|---|
| Power Supply | Rechargeable battery |
| Type | Digital |
| Compatibility | DCC |
| Display | LCD |
| Connectivity | Wireless |
Details the keypad for function control and address entry, and other operational buttons.
Explains screen indicators, status messages, and action key icons for operation.
Explains how to connect power, programming track, and main track outputs.
Details connections for external boosters and ECoS controllers.
Describes how to connect the Dynamis to a PC via USB.
Guide on entering a locomotive's address via keypad to select it for operation.
Method for navigating through the locomotive roster using the joystick.
Procedure for assigning a new address to a decoder on the service track.
Steps to retrieve the current address stored in a decoder on the service track.
Instructions for reading Configuration Variables (CVs) from decoders on service or main track.
Procedure for programming CV values on the service track.
Procedure for programming CV values on the main running track.
Guide to adding or selecting service track programming methods from the system menu.
Explains how to configure the STOP key for full power off or locomotive-only stop.
Procedure for setting a descriptive name for a locomotive.
Guide to selecting a symbol and speed step setting for a locomotive.
Setting locomotive function keys to trigger or latch mode.
Steps to remove a locomotive or consist entry from the roster.
Guide on combining two or more locomotives to run as a single unit.
Ensures each Dynamis system uses a different BASE ID for multi-unit operation.
Assigning unique REMOTE IDs to additional handsets for synchronized operation.
Handling synchronization issues and managing locomotive rosters between units.
Reference for options like EDIT NAME, EDIT SYMBOL, EDIT SPEED, EDIT FX MODE, and DELETE.
Reference for programming addresses and CV values on main and service tracks.
Reference for system settings like BASE ID, REMOTE ID, and system information.
Reference for configuring joystick sensitivity, menu delays, and backlight settings.
Adjusting joystick repeat rate, menu delays, backlight brightness, and duration.
Configuring STOP button behavior and track timeout settings.
Options for factory reset, USB baud rate, and RailCom configuration.
Guide to selecting appropriate track voltage based on locomotive scale.
Troubleshooting common issues like failing to add locomotives or consists.
Diagnosing errors related to reading from or writing to decoders.
Details the 24-month warranty against faulty materials or workmanship.
Instructions for returning the product and necessary documentation for warranty claims.
Specifies conditions that are not covered by the warranty, such as misuse or unauthorized repairs.
To Next Page