Bachmann Dynamis Ultima - Dynamis Menu Reference; Locomotive and consist editing menus; Programming menus; System and remote ID menus

Dynamis Menu Reference 1
Press [MENU] and scroll the menu with [SCROLL] or the joystick Press [CANCEL] to move back up the menu
Option Choices Action
EDIT NAME SET NAME KEY: up to 16 characters free text
| Set 16 character name for locomotive or consist ü to accept
| û to cancel
|
EDIT SYMBOL SET SYMBOL SCROLL: Diesel / Steam / Electric / None ü to accept
| Choose indicative symbol for locomotive or consist û to cancel
|
EDIT SPEED SET SPEEDSTEPS SCROLL: 14 / 28 / 128 ü to accept
| Sets speed steps decoder is operating at û to cancel
|
EDIT FX MODE SET FUNCTIONS TO LATCHING
| SELECT: F0 / F1 / F2 / F3 / F4 / F5 / F6 / F7 F8 / F9 / F10 / F11
F12 /F13 F14 / F15 / F16 / F17 / F18 / F19 / F20 ü to accept
| Sets individual functions to latch or trigger û to cancel
|
DELETE LOCO CONFIRM DELETE ü to accept
| or CONSIST Deletes the current locomotive or consist record from roster û to cancel
|
PROGRAM WRITE ADDR ON MAINTRACK
| Writes a locomotive address using Programming on Main / Ops Mode
| |
| WRITE ADDR ON SERVICETRACK
| Writes a locomotive address using Service Mode*
| READ ADDR ON SERVICETRACK
| Reads address using Service Track
| (Function operates with DYNAMIS PRO box only)
| |
| PROGRAM ON SERVICE TRACK POS CV number
| VAL value
| |
| PROGRAM [CURRENT LOCO]ON MAINTRACK POM CV number
| VAL value
|
|
SYSTEM MENU
|
EDIT BASE ID SET BASE ID Enter number ü to accept
| Default = 0 Range 0-3 û to cancel
|
EDIT REMOTE ID SET REMOTE ID Enter number ü to accept
| û to cancel
|
SYSTEM INFO --------
| |
| EDIT BASE NAME SET BASE NAME Enter name ü to accept
| | û to cancel
| |
| BASE SERIAL NUMBER U00000000 ü to accept
| | û to cancel
| |
| BASE INFO_0 version number Read Only û to cancel
| |
| EDIT REMOTE NAME SET REMOTE NAME Enter name ü to accept
| | Default: Dynamis Remote û to cancel
| |
| REMOTE INFO version number Read Only û to cancel
|
EDIT JOYSTICK SPEED DELAY SET JOYSTICK SPEED DELAY Enter value ü to accept
| Default = 8 Range 0 - 63 û to cancel
| sets the delay before the increase of speed with the joystick
EDIT JOYSTICK SPEED REPEAT SET JOYSTICK SPEED REPEAT Enter value ü to accept
| Default = 12 Range 0 - 63 û to cancel
| sets the speed of the increase of speed with the joystick
EDIT JOYSTICK MENU DELAY SET JOYSTICK MENU DELAY Enter value ü to accept