Tools Required for Installation:
(These are the tools that are generally required for assembly of our swing sets. These tools are not
included in the swing set purchase.)
(Level 24")
(Open End Wrenches 1/2")
(Square)
(Tape Measure)
(3/8" Drive Ratchet, 1/2" STD
Sockets 1/2" Deep Sockets)
(Claw Hammer)
(Cordless Drill or Electric Drill)
(3/16" , 5/16", 1/8" & 3/8" Drill Bits)
(Drill Attachments: Phillips
Head & Socket Driver)
(An Adult w/ an Adult Helper)
(Phillips & Straight
Blade Screw Drivers)
(Rubber Mallet - Optional)
(Ladder)
To Next Page
Loading...
