Introduction
INTRODUCTION
This is the user manual for the High Resolution (HR) LCD encoders.
Audience and Purpose
This manual is intended to be used by utilities for installing and using HR-E LCD and HR-E LCD 4-20 encoders.
Product Unpacking and Inspection
Upon opening the shipping container, visually inspect the product and applicable accessories for any physical damage such
as scratches, loose or broken parts, or any other sign of damage that may have occurred during shipment.
OTE:N If damage is found, request an inspection by the carrier’s agent within 48 hours of delivery and file a claim with the
carrier. A claim for equipment damage in transit is the sole responsibility of the purchaser.
License Requirements
This device complies with Part 15 of the FCC Rules. Operation of this device is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device must accept any interference received, including interference
that may cause undesired operation. Any changes made by the user not approved by Badger Meter can void the user’s
authority to operate the equipment.
DESCRIPTION
High resolution encoders are fully electronic, solid-state devices with no moving parts. The devices come standard as factory
programmed, with the option for programming in the field. Programming is performed through the device IR port via a
computer. The programming kit (PN: 67660-001) can be ordered through Customer Service.
OTE:N Refer to the document, High Resolution LCD Encoder Programmer Manual, available at www.badgermeter.com, for
programming instructions.
HR-E LCD
The HR-E LCD is a permanently sealed, electronic LCD absolute encoder with field-programmable options that produces an
industry standard ASCII encoded output. HR-E LCD encoders are designed for use with all current Badger Meter Recordall®
Disc, Turbo Series, Compound Series, Combo Series and Fire Service meters and assemblies. The encoders provide
connectivity with Badger Meter ORION®
and GALAXY® AMR/AMI endpoints and other AMR/AMI technology solutions
approved by Badger Meter.
HR-E LCD 4-20
The HR-E LCD 4-20 is a permanently sealed, electronic LCD absolute encoder that produces an industry standard ASCII
encoded output as well as an analog 4-20 mA DC output signal with a dual output wire design. HR-E LCD 4-20 encoders are
designed for use with all current Badger Meter Recordall® Disc, Turbo Series, Compound Series, Combo Series and Fire Service
meters and assemblies. The encoders provide connectivity with Badger Meter ORION
AMR/AMI endpoints and other AMR/AMI
technology solutions approved by Badger Meter.
Page 3 April 2019 LCD-UM-01482-EN-07
To Next Page
Loading...
Need help?
General