Operating Manual BaehrTec S2000
English– V101 – Status 07/2015 Page 13/52
Never operate the device with a damaged power cable.
Your device has a removable device connector plug mechanism (see
section "rear view").
Please ensure that the device is positioned so that a disconnection is
Do not work with the BaehrTec S2000 in rooms that are very humid, such
as saunas or swimming complexes. Please take care not to spill any
liquids when filling the tank. Please only fill the tank using the supplied
measuring jug and never directly from cans. Wetness and moisture on the
controller can lead to dangerous current leaks, which poses the risk of an
electric shock.
Never work with the BaehrTec S2000 when liquid leaks from the control
device. This could result in an electric shock.
Disconnect the device immediately from the socket.
Please send the device in for service with a description of the defect.
Avoid significant differences in temperature. This can cause dampness (condensation).
Protect your BaehrTec S2000 from frost.
The device must be switched off and disconnected from the mains before carrying out any
cleaning/maintenance work.
Disconnect the safety plug from the mains immediately should you discover any damage or
malfunctions of the device.
The manufacturer does not accept any liability for damage caused to objects, animals or
persons that were due to improper operation of the BaehrTec S2000.
Ensure that the BaehrTec S2000 including the instruments is always in a hygienically safe
condition so that you do not endanger your health of that of others. Find out more in the
section "Care (disinfection)" of the BaehrTec S2000.
Rings or jewellery worn while working with the device may cause scratches on the
handpiece. Such damage is excluded from the guarantee. Whilst working with the device,
you should avoid wearing jewellery.
Never immerse the device in liquid.
To Next Page
Loading...
