Operating Manual BaehrTec S2000
English– V101 – Status 07/2015 Page 7/52
2.2 Foreword
Dear customer!
We are pleased that you have chosen to buy this pedicure spray device. The BaehrTec
S2000 has technical features that will help you in your work.
The BaehrTec S2000 is produced using many high-quality titanium, aluminium, stainless
steel and plastic parts that are also used in sports car and aircraft construction and so
guarantee the highest degree of stability and quality. Furthermore, the micro-processor-
controlled electronics ensure maximum power and performance from the electronic
components.
The BaehrTec S2000 also has an electronic adjuster for the handpiece motor that provides
power and performance also in the lowest rotation speed ranges. Try it for yourself – you'll
be amazed.
Another highlight is the Easy-Speed concept. Thanks to the instrument illustrations on the
controller, setting the engine speed for the instrument currently in use is guaranteed to be
child’s play (however, this is no substitute for the user checking that the maximum speed for
the instrument currently in use is not exceeded).
In addition to the easy-speed concept, the BaehrTec S2000 has a colour display that
provides you with further information and which will facilitate adjusting some device settings
(e.g. colour background).
Modern electronic devices typically have energy-saving features. This is why we have
purposely not included a standby function for the BaehrTec S2000. Therefore, when your
device is not required, please turn it off using the main switch, which is located in a user-
friendly position on the front of the device. Think about the environment and your wallet.
With the BaehrTec S2000 you have the following convincing "Baehr" advantages:
- very low weight
- very low noise level
- simple operating with a high degree of operating safety
- high performance, perfectly adjusted to the working conditions
- high robustness (for mobile use)
- high and long reliability
- high energy-saving potential (no standby mode)
- Button on handpiece
- innovative air/water-cooling for the handpiece
- 10 super-bright LEDs on handpiece
The pedicure device BaehrTec S2000 is produced and tested according to strict
quality criteria. It complies with the Directive 93/42 EWG for medical products.
We hope your new device brings you plenty of enjoyment and we wish you every success in
operating it.
Your
Gustav Baehr GmbH
To Next Page
Loading...
