Operating Manual BaehrTec S2000
English– V101 – Status 07/2015 Page 5/52
2.1 Symbols
2.1.1 Symbols in these operating instructions
Attention! This symbol indicates a danger to humans or the device. This symbol must
always be given the utmost attention. Read the corresponding sections especially carefully
and adhere very strictly to the specifications.
This symbol provides especially useful advice and gives additional information on operating
the device.
CE sign (Communauté Européenne) with the number of the certification authority. A product
bearing this label fulfils the requirements of the corresponding EU guideline (the applicable
European Standard).
2.1.2 Type label with output details
Fig. 1
CE sign (Communauté Européenne) with the number of the certification authority. A product
bearing this label fulfils the requirements of the corresponding EU guideline (the applicable
European Standard).
Application part of type B
This application part guarantees protection against electric shock due to the compliance of
the leakage currents with standards (Type B).
It is a mandatory requirement that these operating instructions are read and observed
before using the device.
To Next Page
Loading...