Operating Manual BaehrTec S2000
Page 4/52 English– V101 – Status 07/2015
If the power cable / insulation shows signs of damage.
If the device was exposed to moisture and / or wetness.
If the device has been dropped and / or if the device housing is damaged.
In the event of lighting strike and / or surge, the device may be damaged. For this reason,
we also recommend installing surge protection and removing the plug during a storm and /
or after a long period of non-use in order to protect the device from voltage peaks.
Please observe the customary power supply specifications before connecting the device to
the mains.
To Next Page
Loading...
