Baehr Tec S2000 - Page 39

Operating Manual BaehrTec S2000
English– V101 – Status 07/2015 Page 39/52
Fig. 17 Fig. 18 Fig. 19
You can also clean Easy-Clean in the event that cream, fat, oil or the like gets into the
clamping mechanism.
To do so proceed as follows.
1. Turn off the device at the main switch and disconnect it from the power
supply. Never clean the device while the handpiece motor is still running!
Risk of injury! In addition, the clamping mechanism will suffer damage!
2. Moisten the clamping mechanism cleaner 2 with alcohol (Art-No. 11032) (never
use re-lubricating disinfectant or other greasy substances, as Easy-Clean may
otherwise cease to function properly).
3. Insert the clamping mechanism cleaner 2 into the opening of your handpiece
and turn it to the left and right.
4. Remove the clamping mechanism cleaner 2.
5. Now leave the handpiece to air for at least 3 minutes.
Your handpiece is now once again ready for operation.
If your handpiece still does not function correctly in spite of these cleaning measures, or if
you have any questions about the cleaning process, please get in touch with us.
For detailed video instructions on cleaning the Easy-Clean
grips to supplement this information sheet, please go to
www.fusspflege.com/easy-clean
.
To access the website directly, please scan the QR code with
your smartphone and an appropriate app.