5
BF-UM-C-DP C07-EN November 2019
USER MANUAL FOR DISPLAY
7.6 NORMAL OPERATION
7.6.1 Switching the System ON/OFF
Press and hold (>2S) on the display to turn on the system. Press and hold (>2S) again to
turn off the system.
If the "automatic shutdown time" is set to 5 minutes (it can be set with the "Auto Off" function, See
"Auto Off"), the display will automatically be turned off within the desired time when it is not in
operation.
7.6.2 Selection of Support Levels
When the display is turned on, press (<0.5S) the or button to switch to the support level, the
lowest level is 1, the highest level is 5. When the system is switched on, the support level starts in
level 1. There is no support at level null.
7.6.3 Selection mode
Briefly press (<0.5s) the button to see the different trip modes. Trip: daily kilometers (TRIP) - to-
tal kilometers (TOTAL) - Maximum speed (MAXS) - Average speed (AVG) - Remaining distance
(RANGE) - Output power (W) - Energy consumption (C (only with torque sensor fitted)).
To Next Page
Loading...
