6
BF-UM-C-DP C244-EN July 2022
7.6.3 Multifunction Selection
Briefly press button to switch the different function and information.
Circularly show single trip distance (TRIP,km) → total distance (ODO,km) → maximum speed (MAX,k-
m/h) → average speed (AVG,km/h) → remaining distance (Range,km) → riding cadence (Cadence,rpm)
→ energy consumption (Cal,KCal) → riding time (TIME,min) →cycle.
7.6.4 Headlights / Backlighting
Press and hold (>2S) to turn on the headlight and reduce the backlight brightness.
Press and hold (>2S) again to turn off the headlight and increase the backlight brightness.
The brightness of backlight can be set in function“Brightness” within 5 levels.
7.6.5 Walk Assistance
Note: The walk assistance can only be activated with a standing pedelec.
Briefly press button until this symbol appears. Next keep pressing the button until the
walk assistance is activated and the symbol is flashing.(If no speed signal is detected, the
real-time speed is shown as 2.5km/h.) Once releasing the button, it will exit the walk assistance
and the symbol stops flashing. If no operation within 5s, the display will automatically return to
0 mode.
To Next Page
Loading...
Need help?
General
