BAFANG DP E12.UART User Manual

7
DISPLAY MANUAL DP E12.UART
BUTTON DEFINITION
ON/OFF
Level "+" & headlight
Level "-" & Push assistance
NORMAL OPERATION
• Power on/off
press
for 2s, the display will turn ON;
press
for 2s, the display will turn OFF. It
will automatically turn OFF when standby in
5 minutes.
• PAS level selection
Press
or to switch between the dif-
ferent support levels (0 / 1 / 2 / 3 / 4 / 5);
Lowest level and the default level is 1; High-
est level is 5; when no LED light, it is level 0
(mean park level).
• Lamp/LED display luminance
Press
for 2s, LED display turn dim, then
turn on the front lamp and rear lamp at
the same time. Again press for 2s, LED
display highlight, meanwhile turn off front
light and rear light. (if fail to manipulate the
lamps manually , need to restart the LED
HMI and then lamps can restore automati-
cally)
• Walk-assistance selection
Press
for 2 seconds, the walk assistance
will be turned ON, and level LED flicker, If
you move your finger away from this button,
the walk-assistance will be turned OFF.
• Blue tooth connection
After the blue tooth is connected, the LED at
the right of bluetooth
begin flicker.
BUTTON DEFINITION

BAFANG DP E12.UART Specifications

General

Brand	BAFANG
Model	DP E12.UART
Category	Monitor
Language	English