8
CONSUMER MANUAL – DP C18.CAN
6.5 Walk assistance mode
When your Pedelec is motionless, press button until the Walk assistance indicator is dis-
played. At this point, long press button, the Pedelec enters the walk assistance mode, the indica-
tor If release the button will stop this,if no any operations within 5s will automatically return to 0
level. That is stopped from the Walk assistance mode.(as following)
6.6 “SERVICE” indication
HMI will prompt for maintenance according to the mileage and battery charger times. When mileage
exceeds 5000km and the "Service" function is enabled, the "SERVICE" indication will be displayed
every time. This function can be set in the interface. For the operation is detailed in the following
text.
To Next Page
Loading...
Need help?
General
