12
4.3 Plugging Your Battery into the Cart
Your cart has been equipped with fail-safe battery connection,
so the cart will not move when you plug the battery in. Your cart
will only start once the speed control is switched on.
5.0 Battery Lead Fuse
Your battery has a 40amp fuse connected to the battery lead.
The 40 amp fuse helps protect the cart’s control board against
a power surge. An extra fuse is supplied with your cart. In the
unlikelihood of your cart stopping, the reason could be that the
fuse has blown. Replacing the fuse is simple.
The fuse is located on the positive lead close to the battery
terminal.
To replace the fuse, simply open the case and remove the
existing fuse with a pair of pliers. Insert the new fuse ensuring the
two feet are guided into their sleeves. Refit the fuse cap.
Step 2: Plug the battery into
the cart as shown.
The photos below show the lithium ion battery. Follow the same
steps for installing the Sealed Lead Acid battery.
Step 1: Place the battery into
the universal battery tray.
To Next Page
Loading...