Your cart will look like the below photo once the seat is installed.
For personal preference, the seat can be attached on either
side of the cart by inserting the seat bracket from the opposite
direction.
3.8 Attaching the Beverage Holder
The beverage holder can be installed in the upper or lower
bracket on the right side of the cart. Insert the pin of the
beverage holder and twist until it locks into place.
Step 2: Secure the bracket by adding the screw in the
position shown.
Step 3: You can now insert the seat into the bracket.
Hunter™ Quad User Manual 09
IMPORTANT: Press the seat with
your hand before sitting. Do not
use the seat on uneven surfaces.
Bag Boy does not warranty any
seat support brackets that are
damaged or bent
To Next Page
Loading...