EasyManua.ls Logo

BainUltra LIBRA 6632 - Page 16

BainUltra LIBRA 6632
24 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
16
1 800 463.2187 Monday to Thursday from 8 a.m. to 6 p.m. (EST)
.
Friday from 8 a.m. to 5 p.m. (EST)
Printed in Canada. Copyright © June 2023 Bains Ultra Inc. All rights reserved. 45200682
LIBRA COLLECTION | INSTALLATION INSTRUCTIONS
WARNING
IF THE CONNECTIONS OF THE AIR CONDUIT AND THE ELECTRICAL SUPPLY OF THE THERAPEUTIC OPTIONS MUST BE DONE
AT FLOOR LEVEL, YOU MUST CUT AN OPENING ON ONE OF THE WALLS CLOSEST TO TURBINE AND CONTROLS.
Be careful not to drill the inside shell of the bath.
The size of the opening must allow for passage of the conduit and the wires.
(*) : The location of the air conduit is shown as an example. It may differ depending on the positioning of the remote compo-
nents and the orientation of the bath.
TOOLS REQUIRED
Drill
1/4 in. drill bit
Hole saw
Air conduit*
Geysair hose
Electric cables
(optional therapies)
INSTALLATION WITHOUT ACCESS UNDER THE FLOOR