Digital Speedometer Details - Trip meter & Clock Setting
1. Trip Meter Reset : To reset Trip meter follow
the below given steps.
• Press SET button for less than 1 sec.
• Mode changes ODO-TRIP-ODO
• Select ‘Trip’ & press SET button for more than
3 sec but less than 6 sec.
2. Clock Setting :To reset Trip meter follow the
below given steps.
• Press SET button for less than 1 sec.
• Mode changes ODO-TRIP-ODO
• Select ‘ODO’ & press SET button for more
than 7 sec to enter clock setting mode.
• ‘:’ stop blinking & Hour digit start blinking.
9
Action Result
Press SET button for less Increase in hour digit.
than 2 sec
Press SET button continuously Speedy increase in hour digits
No action for less than 5 sec Hour digit will save & minute
digit start blinking for updation.
Press SET button for less Increase in minute digit.
than 2 sec
Press SET button continuously Speedy increase in minute digits
No action for less than 5 sec Minute digit will save & am / pm
start blinking.
No action after entering clock • Auto exit without saving set
mode for more than 10 sec value. (: start blinking & digits
stop blinking)
• If speed input is given, then also
auto exit without saving set value.
To Next Page
Loading...
Need help?
General