14
1. Trim Meter Reset:
Mode & set push button is provided for selecting & resetting
“ODO/ TRIP1/TRIP2/ Distance to next service’.
1. Press mode button for less
than 1 sec.
2. Press set push button for
more than 3 sec.
Mode changes from
“ODO/ TRIP1/TRIP2/ Distance
to next service.
Selected TRIP1/ TRIP2’
will reset.
Other TRIP mode will
continue updating.
2. Service Reminder Reset ( ): 'Wrench' symbol glows when
ODO meter reading reached to set Kms.
This icon will glow at-
1st : 450 Kms 2nd: 4450 Kms
3rd: 9450 Kms 4th: 14450 Kms
& subsequently at each 5000 Kms.
Note: Bring the motorcycle at authorised BAL dealership for
re-setting the service reminder icon.
3. Clock Reset:
• Digital clock indicates time in HR & MM separated by colon
':' It is 12 hour clock.
• For entering clock setting mode - press mode & set button
together for 3 sec.
• Initially ':' will be blinking.
• Clock setting is possible in TRIP 1 mode only.
To Next Page
Loading...
Need help?
General
