Name: Bajaj Pulsar N160
Brand: Bajaj
Rating: 4 (1 reviews)

To Next Page

To Previous Page

**For Battery :

a. Remove battery and keep it on wooden plank, in properly

ventilated area.

b. Before taking the vehicle for use.

• Get the battery recharged from the Authorised battery / BAL

dealer

• Apply petroleum jelly on battery terminals.

Preparation for regular use after storage:

• Follow daily safety checklist mentioned on page No.22

Non-use maintenance is necessary if a vehicle remains off road for

a longer duration (more than 15 days**). The correct and careful

non-use maintenance carried out before storing the vehicle will

prevent the vehicle from rusting and from such other non-

operational damages like fire hazards.

• Clean the entire vehicle thoroughly.

• Empty the fuel from the fuel tank and (if fuel is left in for a longer

time, the fuel will break and gummy substance could clog the

carburettor).

• Remove spark plug & put several drops of Engine oil into the

cylinder. Crank engine over slowly a few times to coat cylinder

wall with oil & install back spark plug.

• Set the vehicle on a box or a stand so that both wheels are

raised off the ground.

• Spray oil on all unpainted metal surfaces to prevent rusting.

Avoid getting oil on rubber parts or brake liners.

• Cover entire vehicle neatly. Make sure that storage area is well

ventilated & free from any source of flames or spark.

• Fill 10% excess air pressure in both wheels.

• Do not apply oil on front brake disc, to prevent rusting. If the

front brake disc rusts during storage, do not attempt to clean

it with soap water. The rust will go off automatically during first

few application of brake.

Questions and Answers:

Need help?

Do you have a question about the Bajaj Pulsar N160 and is the answer not in the manual?

Bajaj Pulsar N160 Specifications

General