32
Method of Sealed Chain Lubrication:
• Put vehicle on main stand. Clean the chain by using lint free cloth
(If excessive mud / slush found approach BAL dealer for proper
cleaning).
• Shake the can vigorously by holding vertically upright till the
noise of steel ball inside heard uniformly.
• Hold spray can at the back of rear sprocket with extension tube
nose at 5-10 cm.
• Rotate the wheel in reverse direction & spray the lube on middle
portion of the chain up to full length of the chain.
Drive chain must be cleaned & lubricated as per periodic
maintenance schedule.
Drive Chain (Sealed type)
• '0' rings must always be kept wet for best performance hence
lubricate at every 500 Km.
• Sealed chain lubrication can easily be done by owners using Bajaj
'Chain Lube Spray Can' available with Bajaj dealers.
To Next Page
Loading...
