Bajaj PULSAR NS200 User Manual

Wheels - Tube Less Tyre
CAUTION : Tubeless tyres are fitted in this
motorcycle. The walls of the tyres in
contact with the wheel rim should not be
damaged in any way during fitment /
removal of tyre. The tyre side walls in
contact with wheel rim seals air.
Wheel Puncture :
• Visit nearest known tubeless tyre repair
shop to remove puncture.
• Remove puncture by Filler or Plug method
only.
• Do not use patch method to remove
puncture of tubeless tyre.
Tyre Pressure :
Keep appropriate tyre pressure as mentioned
below to increase life of the tyre & for better
fuel consumption.
Note : Ensure tyres fitted comply with local
rules and regulations governing tyres.
Front 25 PSI
Pulsar 200 NS/AS Rear (Solo) 28 PSI
Rear (with Pillion) 32 PSI
Front Wheel
Removing Front Wheel :
• Park vehicle perpendicular to the ground on
level surface as mentioned in page no. 21
(6.1)
• Remove speed sensor cable from case meter
assembly.
• Loosen front axle nut.
• Remove front wheel assembly from fork.
27

Bajaj PULSAR NS200 Specifications

General

Displacement	199.5 cc
Max Power	24.5 PS @ 9750 rpm
Max Torque	18.74 Nm @ 8000 rpm
Transmission	6-speed
Fuel System	Fuel Injection
Front Brake	Disc
Rear Brake	Disc
Front Suspension	Telescopic Forks
Rear Suspension	Nitrox mono shock absorber with Canister
Fuel Tank Capacity	12 liters
Kerb Weight	156 kg
Bore x Stroke	72 mm x 49 mm
Clutch	Wet Multi-Plate
Frame Type	Perimeter Frame
Front Tyre	100/80-17
Rear Tyre	130/70-17
Wheelbase	1363 mm
Ground Clearance	167 mm
Seat Height	805 mm
Engine Type	4-stroke, SOHC, 4-Valve
Ignition	Digital