Bajaj PULSAR NS200 - Periodic Maintenance Checks; Spark Plug Maintenance; Drive Chain Care and Lubrication

Periodic Maintenance Information
Spark Plug
• Remove spark plugs by using plug
spanner.
• Clean the spark plugs.
• Adjust the gaps if incorrect by bending
outer electrode carefully.
Spark Plug Gap : 0.7 to 0.8 mm.
Spark Plug (2 Nos.) : RG-6HCC
(LH ‘A’ + RH ‘B’)
(1 No. ) : BOSCH - VR5NE
(Center ‘C’)
0.7 to
0.8 mm
Drive Chain Slackness
• Chain slackness will have to be adjusted
whenever required.
• Std. Chain slackness 15 ~ 25 mm.
• Marking on chain adjusters should be
identically positioned on both sides.
30
CA