Document: 333D012G
5-18-2007
- 56 -
lock washer, and (1) one #8-32 nut provided, onto each weld stud and tighten accordingly. Re-
install side covers onto seal box and tighten. Mount optional short collar [Item 12] and gasket to the
eight (8) studs located at the top of the transition using #8 hardware. [Items 13, 14 & 15 (Detail B)]
With the CEC installed and connected to the building exhaust system the cabinet should be certified
by a qualified technician to assure proper cabinet performance.
Figure 1: Type A2 cabinet – Exhausted to the room
Balancing Damper Control
Mounting Hardware
Exhaust filter protector
To Next Page
Loading...
