Caution:
Never drive up the ramp
without securing the boat. With
large acceleration forces, and
or vibration, the boat could
slide backward causing
damage.
ABL2500® Safety Features
Hydraulic Relief Valve:
A relief valve is incorporated into the
Power Unit – Pump.
The relief valve limits the pressure in
the system to prevent internal system
damage and motor overloading.
The relief valve will activate if the
boats bow is driven up against the
winch post vee-block.
Battery Fuse:
A fuse and fuse holder come standard
with the Power Unit – Battery. It is
connected to the Positive Terminal
on the Battery.
12V Input Plug Fuse:
A Fuse is incorporated into the 12V
input circuit.
Isolator Switch:
The Power Unit has a main isolator
switch and all power is removed from
the ABL2500® when the switch is
turned off.
Momentary Buttons:
The Power Unit and the Remote
Controls have momentary buttons so
that the system will only run when
your finger is on the button, the
moment your finger is removed the
system will stop.
To Next Page
Loading...