Balluff BNI IOL-104-011-K006 - Page 38

18 english
The specifications are typical values for 24VDC at room
temperature.
The module is immediately ready for use.
Further data can be found at www.balluff.com
on the product page.
10.1 Ambient conditions
Ambient temperature
1)
−5…+55°C
Storage temperature −25…+70°C
Protection class
(inscrewed state)
IP67
10.2 Electrical data
Supply
2)
Operating voltage 18…30.2VDC
Residual ripple <1%
Current consumption without
load
≤ 65mA
Digital I/O properties
Input Type1, Type3
1)
Sensor supply output current
(Pin1)
≤200mA (temperature-
dependent)
10.3 Electrical connection
IO-Link interface/port M12, A-coded, 4-pin,
plug
Input ports 8 × M12, A-coded,
4-pin, socket
10.4 Interface
IO-Link version 1.1
Data transmission rate COM2 (38.4 kBit/s)
Minimum cycle time 3.5ms
Process data length 2bytes (input)
10.5 Materials
Housing material Plastic, transparent
10.6 Mechanical features
Installation 3-hole screw mounting
Dimensions (W × H × D) 50×115×30.8mm
Weight Approx.90 g
1)
for UL: limited to 50°C
2)
for UL: only Class 2 voltage source
10.7 Approvals and markings
File: E319845
Enclosure rating: Type1
Ambient temperature: 50°C
Supply from Class 2 source
The CE Mark verifies that our products
meet the requirements of the current EU
Directive.
Additional information on directives, approvals and
standards can be found at www.balluff.com on
the product page.
10
Technical data
955536_AA ∙ EN ∙ G22; Subject to modification.
BNI IOL-104-011-K006
Network interface – Digital hub