Need help?Do you have a question about the Balluff BTL7-E501-M Series and is the answer not in the manual?
General| Series | BTL7-E501-M |
|---|---|
| Category | Industrial Equipment |
| Protection Class | IP67 |
| Housing Material | Aluminum |
| Output Signal | Analog, SSI, or Start/Stop |
| Operating Voltage | 10-30 VDC |
| Resolution | 1 µm |
| Connection | M12 Connector |
Defines the scope and applicability of the guide to specific product models.
Explains visual cues and numbering used for instructions and notes.
Lists the components included in the product package.
Details product certifications, patent information, and compliance marks.
Specifies the proper application and limitations of the position measuring system.
Provides essential safety guidelines for installation and operation personnel.
Clarifies the meaning of signal words and hazard symbols used in the manual.
Instructs on the correct procedures for product disposal according to regulations.
Describes the physical components, housing, and electrical connection details.
Explains the working principle of the transducer and available output functions.
Details the meaning and function of the LED indicators for operational status.
Provides step-by-step instructions for mounting the transducer and avoiding interference.
Details the installation requirements and dimensions for captive magnets.
Explains the installation of floating magnets and required distances for accuracy.
Covers wiring, pin assignments, and cable connections for different models.
Offers guidance on proper shielding and cable management for electromagnetic compatibility.
Outlines the procedure and safety precautions for system startup.
Lists important operational procedures, checks, and security measures.
Presents a table of default output values for factory settings.
Introduces the PC software for configuring transducer settings and functions.
Explains how to connect the USB communication box for transducer configuration.
Details various settings like output functions, magnets, and characteristic curves.
Specifies the precision, repeat accuracy, and non-linearity of the transducer.
Lists the environmental operating and storage conditions, humidity, and protection.
Details the required power supply specifications, including voltage and ripple.
Describes output signal types (voltage/current), ranges, configurations, and loads.
Provides physical dimensions, housing details, and weight specifications.
Details different types of captive magnets and their installation dimensions.
Describes the BTL2-GS10 joint rod accessory for magnet mounting.
Lists various floating magnets and their installation dimensions and specifications.
Details freely configurable M16 connectors (straight and angled) and their pin assignments.
Details preassembled M16 connectors (straight and angled) and cable options.
Details preassembled M12 connectors (straight and angled) and their pin assignments.
Details the USB communication box, its scope of delivery, and connection options.
Explains the meaning of each segment in the product's ordering code.
Provides conversion tables for units of length between millimeters and inches.
Explains the information and markings found on the product's part label.
To Next Page
