Need help?Do you have a question about the Balluff Ethernet/IP BTL7-V50D Series and is the answer not in the manual?
General| Interface | EtherNet/IP |
|---|---|
| Protection Class | IP67 |
| Series | BTL7 |
| Measuring Range | 50 mm |
| Resolution | 1 µm |
Details attributes for the Position Sensor Object for configuration.
Explains settings related to position value, units, and resolution.
Explains configuration options for speed measurement and units.
Details attributes for the device configuration object.
Describes configuration for synchronous operation mode.
Describes configuration for asynchronous operation mode.
Explains parameterization via the Config-Assembly method.
Controls whether Config-Assembly settings take priority.
Sets the number of magnets for the Config-Assembly.
Explains how to set the number of magnets for normal and flexible modes.
Explains I/O messages and data structures for interpretation.
Details how to reset the device to factory settings.
Presents an example program for retrieving and setting attributes.
To Next Page
