Balluff BTL5-T110-M0305-P-S103 - Notes to the User; Validity; Symbols and Conventions; Scope of Delivery

www.balluff.com 5english
1.1 Validity
This guide describes the construction, function and setup
options for the BTL magnetostrictive linear position sensor
with Profibus DP interface. It applies to models
BTL5-T1 __ -M ____ -P-S103 (see Type code on
page19).
The guide is intended for qualified technical personnel.
Read this guide before installing and operating the BTL.
1.2 Symbols and conventions
Individual actions are indicated by a preceding triangle.
► Instruction 1
Action sequences are numbered consecutively:
1. Instruction 1
2. Instruction 2
Note, tip
This symbol indicates general notes.
1.3 Scope of delivery
– BTL
– Mounting clamps with insulating sleeves and screws
– Condensed guide
The magnets are available in various models
and must be ordered separately.
1.4 Software
GSD file via download on the Internet at
www.balluff.com or e-mail to service@balluff.de.
1.5 Approvals and markings
UL approval
File No.
E227256
US Patent 5923164
The US patent was awarded in connection with this
product.
The CE Mark verifies that our products
meet the requirements of the current
EMC Directive.
The BTL meets the requirements of the following product
standard:
– EN61326-2-3 (noise immunity and emission)
Emission tests:
– RF emission EN55011
Noise immunity tests:
– Static electricity (ESD)
EN61000-4-2
Severity level 3
– Electromagnetic fields (RFI)
EN61000-4-3
Severity level 3
– Electrical fast transients (burst)
EN61000-4-4
Severity level 3
– Surge
EN61000-4-5
Severity level 2
– Conducted interference induced by
high-frequency fields
EN61000-4-6
Severity level 3
– Magnetic fields
EN61000-4-8
Severity level 4
More detailed information on the guidelines,
approvals, and standards is included in the
declaration of conformity.
1
Notes to the user
BTL5-T1 __ -M ____ -P-S103
Magnetostrictive Linear Position Sensor – Profile Style