Need help?Do you have a question about the Balluff BTL5-T110-M0305-P-S103 and is the answer not in the manual?
General| Brand | Balluff |
|---|---|
| Model | BTL5-T110-M0305-P-S103 |
| Category | Accessories |
| Language | English |
Describes the applicability of the guide to specific models.
Explains symbols and action sequences used in the guide.
Lists items included in the product package.
Details how to obtain the GSD file for software configuration.
Lists product approvals and compliance markings.
Specifies the intended application and conditions for the sensor.
Provides general safety guidelines for installation and operation.
Details the meaning and structure of warning signals used.
Advises on proper disposal procedures according to regulations.
Details the sensor's housing, electrical connection, and magnet.
Explains the magnetostrictive principle and signal generation.
Specifies the maximum number of magnets and spacing requirements.
Guides on mounting the sensor, orientation, and clamps.
Details installation and spacing for captive magnets.
Details installation and spacing for floating magnets.
Provides guidelines for cable shielding and routing for EMC.
Outlines the pin assignments for electrical connections.
Explains how to connect power, control, and data signals.
Illustrates a typical connection setup for the Profibus system.
Steps and safety precautions for initial system startup.
Recommendations for regular checks and operation.
Lists the factory default settings for the sensor.
Explains how to configure station address and termination.
Details how to set the station address for the device.
Explains how to configure internal bus termination.
Interprets the LED status indicators for Profibus.
Specifies position resolution, linearity, and hysteresis.
Lists operating and storage temperature, humidity.
Details voltage requirements and electrical characteristics.
Defines the control signals used by the sensor.
Specifies magnet-related technical data.
Provides physical dimensions and weight information.
Details maximum cable length for field bus connection.
Details installation dimensions for captive magnets.
Provides specifications for the joint rod accessory.
Details installation dimensions for floating magnets.
Lists available connectors and cables for the system.
Describes freely configurable connector options.
Describes preassembled connector options.
Details preassembled connecting cable options.
Describes configurable bus termination resistance.
Details the transparent cover accessory.
Describes screw plugs for sealing connections.
Provides conversion tables for mm to inches and vice versa.
Shows an example of the product's part label.
To Next Page
