36
APPLICATION OF THE BURNER TO BOILER (steel fixing flange)
1 - Boiler plate
2 - Insulating gasket
3 - Burner fixing flange
4 - Elastic collar
5 - Stud bolt
6 - Locking nut with washer
7 - Nut and washer for fastening the first flange
0002933330
REMARKS
When tightening the flange, it is important to do it evenly so that the inner faces are parallel between
them. Since the locking system is highly efficient, do not tighten the nuts too much.
During this operation (tightening of the flange locking nuts) keep the body of the burner lifted so that the
combustion head is kept in a horizontal position.
ENGLISH
To Next Page
Loading...
