Need help?Do you have a question about the Bambu Lab P1S and is the answer not in the manual?
General| Layer Resolution | 0.1 - 0.3 mm |
|---|---|
| Filament Diameter | 1.75 mm |
| Chamber Temperature | Up to 60°C |
| Nozzle Temperature | Up to 300°C |
| Input Voltage | 100-240V AC, 50/60Hz |
| Extruder Type | Direct Drive |
| Heated Bed | Yes |
| Bed Temperature | Up to 100°C |
| Build Volume | 256 x 256 x 256 mm |
| Print Speed | 500 mm/s |
| Nozzle Diameter | 0.4 mm |
| Connectivity | Wi-Fi, USB |
| Supported Materials | PLA, PETG, TPU |
| Max. Acceleration | 20 m/s² |
| Control | Touchscreen |
| Enclosure | Fully Enclosed |
| Dimensions | 389 x 389 x 457 mm |
To Next Page
