Banana Pi BPI-M2+ - Page 40

5.4Press“Burn”tostartupgrading,Upgradedcomplete,Press“Exit”.
Linuximage:
5.6burunLinuximageunderWindowsos:
*DownloadatoolthatcanwirteimagetoSDcard,suchasWin32Diskimagerfrom:
http://sourceforge.net/projects/win32diskimager/files/Archive/
*Opentheunzippedimagefile
*ClickWritebutton.Waitpatientlytosuccessfullycompletewriting.
5.7burunLinuximageunderLinuxos:
*Runfdisk–lcommandtochecktheSDcardnode.
*Runddif=[imagename]of=/dev/sdxcommandtowriteimagefiletoSDcard.Waitpatientlytosuccessfullycomplete
writing.
Step4:SetupyourBananaPiM2+
Accordingtothesetupdiagrambelow,youcaneasilysetupyourBananaPi.
BPI-M2+QuickStart
40