Server Properties Configuration
32 Chapter 5 Manual Documentation Number: ESP901-902_5012m
B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104 – www.bb-elec.com
B&B Electronics Ltd – Westlink Commercial Pk – Oranmore, Galway, Ireland – Ph +353 91-792444 – Fax +353 91-792445 – www.bb-europe.com
Description of the Server Properties
Figure 30. ESP Manager Server Properties Window
Server Name
This field displays the name that has been assigned to the Serial
Server. A new Server Name of up to 16 characters can be entered. If
more than one Serial Server is connected on the LAN it is
recommended that a new name be assigned to each. When the ESP
Manager finds a Serial Server on the LAN it displays the server name
and IP Address allowing the user to distinguish between Serial
Servers.
Serial Number
Each Serial Server has a unique serial number. This is fixed and
cannot be changed.
Password
Entering a password activates a security feature on the Serial Server.
Once a password is entered it will be required to access the menu and
make changes.
DHCP
DHCP servers are a part of numerous LAN management systems. The
DHCP field provides two choices: Disable and Enable. Disable is the
normal, or default, setting. When enabled, the Serial Server will send a
DHCP request to the DHCP server, which will assign a dynamic IP
To Next Page
Loading...