Bandit CF31 - Controller Properties and Approvals

BANDIT Controller CF31 v2 / Handleiding v.102
Properties of the CF31 v2 controller:
- Simple controller (settings via DIP switches) designed to interface between
the alarm system and the BANDIT 320-xx fog generator. The connection to
the fog generator is via a 3-wire communications line.
- For installation inside a tamper secure housing, the controller is normally
installed inside the alarm panel enclosure.
Approvals:
Certified according to the EN standard: Security fog device/systems:
EN 50131-8.
Industrial property:
- BANDIT is a registered tradename.
- HY-3 is a registered tradename.
- The BANDIT fog generator process is internationally protected by
various patents.
Manufacturer:
BANDIT nv. (plc) RPR Antwerp, div. Tongeren.
Nijverheidslaan 1547 Tel: + (32) 89 85 85 65
B-3660 Opglabbeek Fax: + (32) 89 51 85 47
Belgium web: www.bandit.be
This product is fully developed and manufactured in the BANDIT plant in
Opglabbeek, Belgium.
The company BANDIT nv. is quality certified for development and
manufacture of fog generators following the standard ISO 9001.
C
Text and drawings in this document are covered by copyright law.
Copyright: Bandit plc, B-3660 Opglabbeek, Belgium.
Certificat:
BE 10/23574209
p. 2 - Introduction
EN-50131-8
BANDIT Controller CF31 v2 / Manual v.102