Page 7
BALANCE - The balance control is used to adjust the relative volume of the left and right
channels. This affects the PRE AMP OUT connections and the headphone
output.
VOLUME - Turning the volume control clockwise increases the volume level,
counterclockwise decreases the volume level.
STEREO
MONO - The stereo/mono switch selects the mode in which the incoming signals are
processed through the preamplifier. Stereo mode (switch out) provides
normal stereo reproduction, monaural signals will be reproduced in mono.
Mono mode (switch in) reproduces both stereo and mono signals in monaural.
To Next Page
Loading...
