To Next Page

To Previous Page

13258 11/01

AUDIO MODES

Your processor is designed to work with 4 audio listening modes. Under normal operation you may simply select

Mono, Stereo, Surround or DVD Audio via the remote control. In addition, you may choose an audio listening

mode immediately followed by a speaker selection. The table below shows how your processor will route audio

with the various audio modes and speaker selection combinations. This table assumes seven full range speakers

plus a subwoofer. If your speaker configuration is different from this make sure you have performed the set up

procedures described previously (see SETUP SPEAKER SIZE). When the setup is correctly performed your

processor will route audio to fewer/smaller speakers with the needed corrections to volume and “down mixing”

applied automatically.

Mono

Select 0

Headphone

Select 1

SUB

Select 2

SUB

Select 3

SUB

Select 4

Select 4B

SUB

Select 5

Select 5B

SUB

Select 6

SUB

Sbl

Sbr

SUB

Sbl

Sbr

SUB

Select 7

SUB

Select 8

Direct

'Analog'

Select 9

(Lt Rt)

Stereo

Surround

DVD Audio

AUDIO MODE

Speakers

Brand	B&K
Model	Reference 20 Plus
Category	Controller
Language	English

B&K Reference 20 Plus User Manual

Table of Contents

Questions and Answers:

B&K Reference 20 Plus Specifications

Related product manuals