Need help?Do you have a question about the B&K Reference 50 and is the answer not in the manual?
General| Audio Formats Supported | Dolby Digital, Dolby Pro Logic, DTS, HDCD |
|---|---|
| Video Formats Supported | Composite, S-Video, Component |
| Control Protocols | RS-232, IR |
| Channels | 7.1 |
| Frequency Response | 20 Hz - 20 kHz ±0.5dB |
General instructions for navigating the processor's menu system.
Guides initial setup after installation or changes.
Configures speaker size, location, and levels for optimal audio.
Sets speaker sizes for proper bass management.
Electronically adjusts speaker placement for time alignment.
Calibrates individual speaker volume levels for balanced sound.
Configures crossover frequencies and LFE channel settings.
Adjusts room acoustics with notch filters and EQ settings.
Sets front panel and on-screen display parameters.
Configures audio modes, speaker selections, and source names.
Manages saving and recalling system settings configurations.
Selects and adjusts specific surround sound decoder modes.
Saves and restores system settings for backup purposes.
Instructions for turning the processor on and off using the main switch or sleep mode.
Puts the processor into standby mode for quick startup.
Selects the desired audio/video input source for playback.
Details operation of the built-in AM/FM tuner.
Controls master and zone volume levels and mute function.
Allows temporary adjustments to center, surround, and subwoofer levels.
Selects listening modes like Mono, Stereo, Surround, THX, and DVD Audio.
Provides access to additional processor operation modifications.
Configures Zone 1 settings like max level, Zone ID, and V1 output.
Sets the maximum volume level for Zone 1.
Assigns a unique ID for Zone 1 remote control.
Controls the display of on-screen status messages.
Configures the V1 output for tape loop or line out.
Configures Zone 2 settings like level control, Zone ID, and V2 output.
Sets the level control mode for Zone 2 (Variable or Fixed).
Sets the maximum volume level for Zone 2.
Assigns a unique ID for Zone 2 remote control.
Configures the V2 output for tape loop or line out.
Displays the current Digital Signal Processor (DSP) usage in MIPS.
Configures the advanced computer interface control port settings.
Contains system-wide advanced configuration options.
Customizes the text displayed when the processor powers on.
Configures the 12V trigger outputs for controlling external devices.
Configures Control Output 1 for specific sources or functions.
Configures Control Output 2 for specific sources or functions.
Configures Control Output 3 for specific sources or functions.
Configures Control Output 4 for specific sources or functions.
Protects settings and prevents unauthorized access or changes.
To Next Page
