b&t RTL8720D - ATPI-View Connection List

中山市博安通通信技术有限公司
ZHONGSHAN B&T TECHNOLOGYCo., Ltd
Page 22 of 34
4.6
ATPK-automatic data receiving mode
ATPK=<enable>
Description
Set the automatic receive mode. The received data is in the same format as the
ATPR response in normal mode.
Only data is returned, and no other format is returned.
Response
Success
[ATPK] OK
Fail
[ATPK] ERROR:<error_no>
Parameter
enable:
0: disable automatic receiving
1: enable automatic receiving
Error
Code
1: Parameter error
2: An error occurred while enabling the automatic receive task.
Example
// The UDP server reads the data
# ATPN=B&T-1,test123456
[ATPN] OK
# ATPS = 1400, 5
#
[ATPS] OK
[ATPS] con_id=2
# ATPI
Con_id: 1, server, TCP, address: 192.168.20.115, port: 4004, sockets: 0
Con_id: 2, server, udp, address: 192.168.20.115, port: 4005, sockets: 1
[ATPI] OK
# ATPK=1
[ATPK] OK
// Use the socket tool to send data to 192.168.20.115:4005
#
[ATPR] OK, 8,2,192.168. 20.112, 10086: the test of STR
4.7 ATPI-View Connection list
ATPI
Description
View Connection list
Response
con_id :<con_id >,<server/seed(TCP client)/client>,\
<tcp/udp>,address:<IP ADDRESS>,port:<PORT>,socket:<socket id>
…
[ATPI] OK