中山市博安通通信技术有限公司
ZHONGSHAN B&T TECHNOLOGYCo., Ltd
(3) Open the server program
The Server program is in sdk\tools\DownloadServer\ downloadserver.exe
In windows cmd command line mode, go to the server directory and copy the OTA files to be
upgraded here
exe 10086.\OTA3_All.bin (10086 is a self-defined port number,
OTA3.bin is the upgrade file.) Start the server
(4) The module connects to the network and starts downloading
Use the ATPN to connect to the same network as the server (the module can ping the server IP
address).
Run ATSO=192.168.20.112. 10086 //10086 is the port number defined by the server
number defined by the server itself
The server displays the following
To Next Page
Loading...