b&t RTL8720D - ATSO OTA Upgrade

中山市博安通通信技术有限公司
ZHONGSHAN B&T TECHNOLOGYCo., Ltd
Page 6 of 34
2.9
ATSO OTA upgrade
ATSO=<IP>,<port>
Description
OTA upgrade
Response
ATS0] OK
This is an asynchronous operation. Receiving OK simply means the task has
started. Other messages need to be checked in the log port.
It will automatically restart after work
Parameter
IP: server IP
Port: server Port
Example
Reference appendix 1: OAT upgrade process
2.10
ATSC switch Image
ATSC=<image ID>
Description
Switch images
Response
[ATSC] OK
[ATSC] ERROR:<error_code>
Parameter
image ID:
0: uses OTA1
mirroring
1: Use OTA2
mirroring
Notice
The module will be restarted after the switchover is successful (OTA upgrade
will automatically switch the image without manual switching)
Example
ATSC=1
[ATSC] OK
2.11 ATSG-GPIO control
ATSG=<OPT>,<PORT>[,<DATA>,<DIR>,<PULL>]
Description
GPIO control