B&W Tek NanoRam Series User Manual

NanoRam
®
Series Handheld Raman
19 Shea Way, Newark, DE 19713, USA • Tel: +1 (302) 368-7824 • Fax: +1 (302) 368-7830 • Web: www.bwtek.com
290020255-J (2017/07/28) Page 24 of 38 Copyright 2017 B&W Tek
The Operator users have access to the functions of select Method, select Operation
Preset, perform Identification, perform Investigation, and perform Validation Test, as
well as view Library list. The Operator can also perform Data Transfer and thus
access the Wireless and Ethernet functions in the Set Up. The rest of the Set Up
functions are deactivated for the Operator user type, but are accessible for Developer
and Administrator user types. For example, in General setting, an operator can only
see following window.
3.2. Perform Material Identification
Press the Identification icon on the home screen. The screen for Load Method will
be displayed.
Load the method by either scanning barcode or manual selection of the method name
from the method list. Enter the number of samples to be tested. When the number of
samples is more than one, the identification will be performed in a batch fashion where

B&W Tek NanoRam Series Specifications

General

Brand	B&W Tek
Model	NanoRam Series
Category	Measuring Instruments
Language	English