B&W Tek NanoRam Series User Manual

NanoRam
®
Series Handheld Raman
19 Shea Way, Newark, DE 19713, USA • Tel: +1 (302) 368-7824 • Fax: +1 (302) 368-7830 • Web: www.bwtek.com
290020255-J (2017/07/28) Page 33 of 38 Copyright 2017 B&W Tek
4. NID Software
4.1. About NID
NID is a software package included with the NanoRam shipment and is used for
management and reporting of data collected with the NanoRam. There are two services
designed in the NID software to function on the client’s PC and server, respectively:
• NID Client – for client PC to access the NanoRam device and manage data
• NID Server – for client server for data storage
The connection between the NanoRam device and the PC can be either through Ethernet
cable or Wi-Fi network.
When the data on NanoRam device (user account info, test result, library, audit trail data,
etc.) is synchronized onto server using NID Client, the data is stored on the NID Server.
4.2. Device Connection on NID
The device connection on NID is done by connecting the NanoRam unit with the
computer via Ethernet or Wi-Fi. The connection should be established by the
Administrative user.
When an Ethernet cable is used to connect the NanoRam to a PC, make sure:
• Ethernet cable is connected between NanoRam and PC or via an internet
router/network port.
• Ethernet connection is enabled in Data Transfer menu in NOS software on
NanoRam unit.
When Wi-Fi is used to connect the NanoRam to a PC, make sure:
• Both NanoRam unit and the PC are successfully connected to the same Wi-Fi
network.
• Wi-Fi connection is enabled in Data Transfer menu in NOS software on
NanoRam unit.
Note: For data security measure, the Ethernet or Wi-Fi connection will be disconnected
automatically under two scenarios: i) if the NanoRam is out of the Data Transfer screen;

B&W Tek NanoRam Series Specifications

General

Brand	B&W Tek
Model	NanoRam Series
Category	Measuring Instruments
Language	English