5-Pin Threaded M12/Euro-Style Cordsets
Model Length Style Dimensions Pinout
MQDC1-530RA
32 Typ.
[1.26"]
30 Typ.
[1.18"]
ø 14.5 [0.57"]
M12 x 1
9.14 m (30 ft)
Retroreflective Targets
For additional information and a complete list of accessories, please refer to Banner Engineering website http://www.bannerengineer-
ing.com
NOTE: Polarized sensors require corner cube type retroreflective targets only.
BRT-2X2
• Square, acrylic target
• Reflectivity factor: 1.0
• Max. temperature: +50 °C (+122 ºF)
• Optional brackets are available
• Approximate size: 51 mm x 51 mm
BRT-51X51BM
• Square, acrylic target
• Reflectivity Factor: 1.5
• Max. Temperature: +50
°C (+122 °F)
• Micro-prism geometry
• Optional brackets are
available
• Approximate size: 51 mm
x 51 mm
Retroreflective Tape
Model Reflectivity Factor Maximum Temperature Size
BRT-TVHG-2X2 0.8 +60ºC (+140ºF) 50 x 50 mm
Accessory Brackets
Models
SMB30SC
• Swivel bracket with 30 mm
mounting hole for sensor
• Black reinforced thermo-
plastic polyester
• Stainless steel mounting
and swivel locking hard-
ware included
Hole center spacing: A=ø 50.8
SMBQS30L
• Right-angle bracket for ca-
ble sensor models
• Clearance for M4 (#8)
hardware
• ± 12° tilt adjustment
• 14-ga. stainless steel
Hole center spacing: A to B=35.0
WORLD-BEAM QS30 LLP and LLPC
P/N 112355 Rev. C www.bannerengineering.com - tel: 763-544-3164 11
To Next Page
Loading...
